- NISSAN
- MAZDA
- SUZUKI
NISSAN VQ35DE/VQ35HR
| Spec (unit: mm) | PART # | MSRP(yen) | REMARKS | ||
|---|---|---|---|---|---|
| Duration | Lift | ||||
| VQ35DE Early model (to Sep. 2005) | |||||
| 64 (256) | 10.3 | IN | 1004M-N461 | JPY52,000 | |
| EX | 1004M-N561 | JPY52,000 | |||
| 66 (264) | 10.8 | IN | 1004M-N462 | JPY52,000 | |
| EX | 1004M-N562 | JPY52,000 | |||
| 68 (272) | 10.8 | IN | 1004M-N463 | JPY58,000 | |
| EX | 1004M-N563 | JPY58,000 | |||
| 68 (272) | 11.3 | IN | 1004M-N464 | JPY58,000 | [REQUIRED]Uprated valve spring |
| EX | 1004M-N564 | JPY58,000 | |||
| 70 (280) | 11.3 | IN | 1004M-N465 | JPY58,000 | [REQUIRED]Uprated valve spring |
| EX | 1004M-N565 | JPY58,000 | |||
| VQ35DE Late model (to Jan. 2007) | |||||
| 64 (256) | 10.3 | IN | 1004M-N466 | JPY52,000 | |
| EX | 1004M-N566 | JPY52,000 | |||
| 66 (264) | 10.8 | IN | 1004M-N467 | JPY52,000 | |
| EX | 1004M-N567 | JPY52,000 | |||
| 68 (272) | 10.8 | IN | 1004M-N468 | JPY58,000 | |
| EX | 1004M-N568 | JPY58,000 | |||
| 68 (272) | 11.3 | IN | 1004M-N469 | JPY58,000 | [REQUIRED]Uprated valve spring |
| EX | 1004M-N569 | JPY58,000 | |||
| 70 (280) | 11.3 | IN | 1004M-N470 | JPY58,000 | [REQUIRED]Uprated valve spring |
| EX | 1004M-N570 | JPY58,000 | |||
| VQ35HR | |||||
| 64 (256) | 10.3 | IN | 1004M-N471 | JPY52,000 | |
| EX | 1004M-N571 | JPY52,000 | |||
| 66 (264) | 10.8 | IN | 1004M-N472 | JPY52,000 | |
| EX | 1004M-N572 | JPY52,000 | |||
| 68 (272) | 10.8 | IN | 1004M-N473 | JPY58,000 | |
| EX | 1004M-N573 | JPY58,000 | |||
| 68 (272) | 11.3 | IN | 1004M-N474 | JPY58,000 | [REQUIRED]Uprated valve spring |
| EX | 1004M-N574 | JPY58,000 | |||
| 70 (280) | 11.3 | IN | 1004M-N475 | JPY58,000 | [REQUIRED]Uprated valve spring |
| EX | 1004M-N575 | JPY58,000 | |||
- ‡ The price of this product is for a set of two INT or EXH camshafts.
- ‡ The height of lift is the valve lift.
- ‡1 The camshaft which is 11.0mm or higher lift of the profile needs to use uprated valve springs. You need to prepare a suitable valve spring separately.
- ‡2 The camshaft which is 11.0mm or higher lift of the profile maybe collid with valves and a piston. In addition, the valves may collid with a piston depending on the state of the engine even if a valve lift is less than 11.0mm. Check the clearance when you install. Require the valve recess machining if the valves interfere with a piston.
