NISSAN RB26DETT

• 
• 
• 

Bolt-on Camshaft Series

This camshaft already adjusted the valve timing. It is bolt-on camshaft which is stock base circle.

Regular Camshaft Series

This series is a camshaft with the generality which it has from former times. And, this series can choose in the Camshaft Kit.

Advanced Camshaft Series

This series is for high power engine because the cam lift is high very much.

High Lift Camshafts for RB26DETT

Spec (unit: mm)					PART #		MSRP(yen)	REMARKS
Duration	Lift	BC	VC		R32/R33	R34
Bolt-on Camshaft Series
62 (248)	8.8	32	0.30	IN	1004M-N231	←	JPY34,000
			0.33	EX	1004M-N331	1004M-N531	JPY34,000
	9.15	32	0.30	IN	1004M-N232	←	JPY34,000
			0.33	EX	1004M-N332	1004M-N532	JPY34,000
64 (256)	9.15	32	0.30	IN	1004M-N233	←	JPY34,000
			0.33	EX	1004M-N333	1004M-N533	JPY34,000
66 (264)	9.15	32	0.30	IN	1004M-N234	←	JPY34,000
			0.33	EX	1004M-N334	1004M-N534	JPY34,000
Regular Camshaft Series
64 (256)	9.7	31	0.30	IN	1004M-N092	←	JPY36,000	[REQUIRED]Uprated valve spring
			0.33	EX	1004M-N192	1004M-N500	JPY36,000
66 (264)	9.7	31	0.30	IN	1004M-N095	←	JPY36,000	[REQUIRED]Uprated valve spring
			0.33	EX	1004M-N195	1004M-N501	JPY36,000
	10.5	30	0.30	IN	1004M-N221	←	JPY36,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining
			0.33	EX	1004M-N321	1004M-N521	JPY36,000
68 (272)	9.7	31	0.30	IN	1004M-N097	←	JPY36,000	[REQUIRED]Uprated valve spring
			0.33	EX	1004M-N197	1004M-N502	JPY36,000
	10.5	30	0.30	IN	1004M-N092R	←	JPY36,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining
			0.33	EX	1004M-N192R	1004M-N503	JPY36,000
	10.8	30	0.30	IN	1004M-N101R	←	JPY36,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining [REQUIRED]Special valve retainer (+0.5mm offset)
			0.33	EX	1004M-N201R	1004M-N504	JPY36,000
	11.35	29	0.30	IN	1004M-N104	←	JPY36,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining [REQUIRED]Special valve retainer (+1.5mm offset)
			0.33	EX	1004M-N198R	1004M-N506	JPY36,000
70 (280)	10.8	30	0.30	IN	1004M-N093R	←	JPY36,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining [REQUIRED]Special valve retainer (+0.5mm offset)
			0.33	EX	1004M-N193R	1004M-N505	JPY36,000
	11.35	29	0.30	IN	1004M-N105	←	JPY36,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining [REQUIRED]Special valve retainer (+1.5mm offset)
			0.33	EX	1004M-N199R	1004M-N507	JPY36,000
72 (288)	11.35	29	0.30	IN	1004M-N106	←	JPY36,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining [REQUIRED]Special valve retainer (+1.5mm offset)
			0.33	EX	1004M-N200R	1004M-N508	JPY36,000
Advanced Camshaft Series
70 (280)	11.65	29	0.30	IN	1004M-N241	←	JPY42,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining
			0.33	EX	1004M-N341	1004M-N541	JPY42,000
72 (288)	11.65	29	0.30	IN	1004M-N242	←	JPY42,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining
			0.33	EX	1004M-N342	1004M-N542	JPY42,000
	11.8	29	0.30	IN	1004M-N243	←	JPY42,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining
			0.33	EX	1004M-N343	1004M-N543	JPY42,000
74 (296)	11.65	29	0.30	IN	1004M-N244	←	JPY42,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining
			0.33	EX	1004M-N344	1004M-N544	JPY42,000
	11.8	29	0.30	IN	1004M-N245	←	JPY42,000	[REQUIRED]Uprated valve spring [REQUIRED]Cam lobe refuge machining
			0.33	EX	1004M-N345	1004M-N545	JPY42,000

• BC=Base Circle
• VC=Valve Clearance (cool conditions)
• ‡ The height of lift is the valve lift.
• ‡1 This camshaft needs to use uprated valve springs.
• ‡2 The camshaft which is 11.35mm or higher lift of the profile needs to use uprated valve springs for 11.35mm lift.
• ‡3 You need to prepare a suitable valve spring separately because our uprated valve spring we sell can use only 11.35mm or less valve lift.
• ‡4 The camshaft which is 10.8mm or higher lift of the profile needs to use the exclusive use valve retainers (+0.5mm offset).
• ‡5 The camshaft which is 11.35mm or higher lift of the profile needs to use the exclusive use valve retainers (+1.5mm offset).
• ‡6 The camshaft which is 10.5mm or higher lift of the profile needs to trim your cylinder head.
• ‡ Check the cam lob does not contact with your cylinder head when you installing because you may need to trim your cylinder head according to the conditions of your cylinder head even if the lift height is under 10.5mm.
• ‡ カムノーズ逃げ加工とは、カム山がヘッドに干渉する場合にヘッド側を切削する加工です。弊社でも加工を承っています。
• ‡ Intake camshafts for BNR34 are same as the BNR32/BCNR33.
• ‡ We prepare the Camshaft Kit which contains valve springs and valve retainers.

Camshaft Kit for RB26DETT

Stage #	Content				PART #	MSRP(yen)	REMARKS
	INT CAM	EXH CAM	Valve S/P	Retainer
Stage1	Choose profile from Regular cam		Ο	N/A	1033M-N004	JPY106,000	Choose 10.5mm or lower lift
Stage2	Choose profile from Regular cam		Ο	Type 1	1033M-N005	JPY178,000
Stage2R	Choose profile from Regular cam		Ο	Type 2	1033M-N015	JPY198,000
Option	A set of cam slide sprockets (2 pc.)				1033M-N701	JPY28,000

• ‡ You can choose the profile from Regular camshaft series which is placed in this page. You cannot choose Bolt-on camshaft series, Advanced camshaft series, and the custom made camshaft.
• ‡ When you choose Stage 1, you need to choose from the profile 10.5mm or lower basically. 10.8mm or higher camshaft is required the spacial valve retainer.
• ‡ We will choose the product which can be used for the profile which you chose, when enclosing the valve springs and valve retainers of each stage.
• ‡ Option (cam slide sprocket) is a special price in case you purchase together with a camshaft kit. You cannot buy it alone.