CUSTOM KIT

  • OUTLINE
  • POINTS
  • LINE-UP
  • DETAILS

LINEUP

CUSTOM KIT BASIC 2.7L for RB26DETT

BASIC SERIES

COMPONENTS: PISTON KIT, CRANK SHAFT
The Basic series is inexpensive version of stroker kit by expect connecting rods. The stock size rods can use with this kit.
LINE-UP MODEL OF MACHINES
NISSAN
TOYOTA
CUSTOM KIT EX 4.0L for VR38DETT

EX SERIES

COMPONENTS: PISTON KIT, I-BEAM RODS, CRANK SHAFT
The EX series is containing whole parts of increasing displacement volume. This kit will show true value when the motor use in exacting race stage such as needing balance of engine and stiffness parts.
LINE-UP MODEL OF MACHINES
NISSAN
TOYOTA
HONDA
MITSUBISHI
SUBARU
SUZUKI
CUSTOM KIT EX turbo 3.8L for VQ35DE

EX turbo SERIES

COMPONENTS: PISTON KIT, CRANK SHAFT
The EX-turbo series was developed to change a NA engine into the turbo engine. The parts used with a NA engine can't support a turbo engine because they aren't enough for the strength. This kit gives strengthened parts and the most suitable compression rate for turbo.
LINE-UP MODEL OF MACHINES
NISSAN
SUBARU

NISSAN VR38DETT

CUSTOM KIT

VR38DETT Custom Kit EX 4.0L

COMPONENTS:

Forged Aluminum Piston x 6, Piston Pin x 6, Snap Ring x 12, Piston Ring Set x 6, I-Beam Connecting Rod x 6, Billet Crank Shaft x 1

This kit required to install cylinder liner.

SPECIFICATIONS
Type EX
Part # 1029M-N010
Bore 96.0mm
Stroke 92.0mm
Displacement 3996cc
Comp. Ratio 8.8:1
PISTON SPECIFICATIONS
Piston Wt. 365g
Piston-pin Wt. 102g
Comp. Height --.-mm
Crown Shape Concavity
Crown Volume --.-cc
Recession Volume-.-cc
  • It's the reference value when a 0.7mm thickness gasket was used.

NISSAN VQ35DE

CUSTOM KIT

VQ35DE Custom Kit EX turbo 3.8L

This is a stroker kit which fits compression ratio for turbo engine.
Please consider our stroker crank shaft and rods for 3.8L since we are selling them alone, if you want to assemble your engine for NA with high compression pistons.

COMPONENTS:

Forged Piston C-Series x 6, Piston Pin x 6, Snap Ring x 12, Piston Ring Set x 6, I-Beam Connecting Rod x 6, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX turbo
Part # 1029M-N008
Bore 95.7mm
Stroke 87.4mm
Displacement 3772cc
Comp. Ratio 8.4:1
PISTON SPECIFICATIONS
Piston Wt. 368g
Piston-pin Wt. 131g
Comp. Height 29.6mm
Crown Shape Concavity
Crown Volume 23.5cc
Recession Volume0.5cc
  • It's the reference value when a 0.7mm thickness gasket was used.
  • Do processing to keep clearance between rod and cylinder block because the rods will collide internal block as the result of long stroke.

NISSAN VG30DETT

CUSTOM KIT

VG30DETT Custom Kit EX 3.2L

COMPONENTS:

Forged Piston C-Series x 6, Piston Pin x 6, Snap Ring x 12, Piston Ring Set x 6, I-Beam Connecting Rod x 6, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX
Part # 1029M-N007
Bore 89.0mm
Stroke 87.0mm
Displacement 3247cc
Comp. Ratio 8.46:1
PISTON SPECIFICATIONS
Piston Wt. 321g
Piston-pin Wt. 103g
Comp. Height 30.0mm
Crown Shape Concavity
Crown Volume 16.0cc
Recession Volume -.-cc
  • It's the reference value when a 1.2mm thickness gasket was used.

NISSAN RB26DETT

CUSTOM KIT

RB26DETT Custom Kit EX 2.8L

COMPONENTS:

Forged Piston C-Series x 6, Piston Pin x 6, Snap Ring x 12, Piston Ring Set x 6, I-Beam Connecting Rod x 6, Billet Crank Shaft x 1

CUSTOM KIT

RB26DETT Custom Kit BASIC 2.7L

COMPONENTS:

Forged Piston C-Series x 6, Piston Pin x 6, Snap Ring x 12, Piston Ring Set x 6, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX BASIC
Part # 1029M-N006  1029M-N003
Bore 87.0mm 87.0mm
Stroke 78.0mm 75.7mm
Displacement 2782cc 2700cc
Comp. Ratio 8.4:1
PISTON SPECIFICATIONS
Piston Wt. 335g
Piston-pin Wt. 101g
Comp. Height 28.5mm 29.0mm
Crown Shape Convexity
Crown Volume 13.0cc 14.8cc
Recession Volume N/A
  • It's the reference value when a 1.6mm thickness gasket was used.

NISSAN SR20DET

CUSTOM KIT

SR20DET Custom Kit EX 2.2L

COMPONENTS:

Forged Piston C-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, I-Beam Connecting Rod x 4, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX
Part # 1029M-N004
Bore 87.0mm
Stroke 92.0mm
Displacement 2188cc
Comp. Ratio 8.4:1
PISTON SPECIFICATIONS
Piston Wt. 313g
Piston-pin Wt. 103g
Comp. Height 30.0mm
Crown Shape Concavity
Crown Volume 18.0cc
Recession Volume N/A
  • It's the reference value when a 1.6mm thickness gasket was used.
  • This kit require flywheel and its bolt for RNN14 Pulsar.

TOYOTA 2JZ-GTE

CUSTOM KIT

2JZ-GTE Custom Kit EX 3.2L

COMPONENTS:

Forged Piston C-Series x 6, Piston Pin x 6, Snap Ring x 12, Piston Ring Set x 6, I-Beam Connecting Rod x 6, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX
Part # 1029M-T002
Bore 87.0mm
Stroke 90.0mm
Displacement 3210cc
Comp. Ratio 8.5:1
PISTON SPECIFICATIONS
Piston Wt. 346g
Piston-pin Wt. 103g
Comp. Height 32.0mm
Crown Shape Concavity
Crown Volume 16.7cc
Recession Volume 1.7cc
  • It's the reference value when a 1.6mm thickness gasket was used.

TOYOTA 3S-GTE

CUSTOM KIT

3S-GTE Custom Kit EX 2.2L

COMPONENTS:

Forged Piston C-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, I-Beam Connecting Rod x 4, Billet Crank Shaft x 1

CUSTOM KIT

3S-GTE Custom Kit BASIC-II 2.2L

COMPONENTS:

Forged Piston C-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX BASIC-II
Part # 1029M-T003  1029M-T004
Bore 87.0mm
Stroke 92.0mm
Displacement 2188cc
Comp. Ratio 8.3:1
PISTON SPECIFICATIONS
Piston Wt. 343g
Piston-pin Wt. 103g
Comp. Height 32.0mm
Crown Shape Concavity
Crown Volume 18.0cc
Recession Volume 0.4
  • It's the reference value when a 1.2mm thickness gasket was used.
  • As for BASIC/BASIC-II, make width of small end narrow when you use this kit with the stock rod or same spec.
  • We are making special rods for the BASIC/BASIC-II. Please consider it.

HONDA B16A

CUSTOM KIT

B16A B16A Custom Kit EX 1.8L

  • This kit is no longer available due to specification changes.

COMPONENTS:

Forged Piston C-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, I-Beam Connecting Rod x 4, Forged Crank Shaft x 1

SPECIFICATIONS
Type EX
Part # 1029M-H001
Bore 82.0mm
Stroke 87.2mm
Displacement 1842cc
Comp. Ratio 11.6:1
PISTON SPECIFICATIONS
Piston Wt. 289g
Piston-pin Wt. 77g
Comp. Height 28.0mm
Crown Shape Convexity
Crown Volume 4.0cc
Recession Volume 2.7cc
  • It's the reference value when a 0.8mm thickness gasket was used.

HONDA B16B/B18C

CUSTOM KIT

B16B/B18C Custom Kit EX 2.0L

  • This kit is no longer available due to specification changes.

COMPONENTS:

Forged Piston C-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, I-Beam Connecting Rod x 4, Billet Crank Shaft x 1

B16B/B18C Custom Kit EX-II 2.0L

COMPONENTS:

Forged Piston P-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, H-Beam Connecting Rod x 4, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX EX-II
Part # 1029M-H002 1029M-H004
Bore 82.0mm 82.0mm
Stroke 94.0mm 94.0mm
Displacement 1986cc 1986cc
Comp. Ratio --.-:- --.-:-
PISTON SPECIFICATIONS
Piston Wt. ---g ---g
Piston-pin Wt. --g --g
Comp. Height --.-mm --.-mm
Crown Shape ConvexityConvexity
Crown Volume -.-cc -.-cc
Recession Volume -.-cc -.-cc

MITSUBISHI 4G63

CUSTOM KIT

4G63 Custom Kit EX 2.2L

COMPONENTS:

Forged Piston C-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, I-Beam Connecting Rod x 4, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX
Part # 1029M-M001
Bore 85.5mm
Stroke 94.0mm
Displacement 2159cc
Comp. Ratio 8.5:1
PISTON SPECIFICATIONS
Piston Wt. 327g
Piston-pin Wt. 104g
Comp. Height 33.0mm
Crown Shape Concavity
Crown Volume 21.6cc
Recession Volume -.-cc
  • It's the reference value by the next conditions.
    Evo 4 ... 1.0mm Head gasket
    Evo 5/6 ... 0.8mm Head gasket

MITSUBISHI 4B11

CUSTOM KIT

4B11 Custom Kit EX 2.3L

COMPONENTS:

Forged Piston W-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, I-Beam Connecting Rod x 4, Forged Crank Shaft x 1, Rod Bearing x 4, Oil jet x 4

CUSTOM KIT

4B11 Custom Kit EX 2.2L

COMPONENTS:

Forged Piston C-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, I-Beam Connecting Rod x 4, Rod Bearing x 4, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX 2.3LEX 2.2L
Part # 1029M-M0021029M-M003
Bore 87.0mm87.0mm
Stroke 97.0mm92.0mm
Displacement 2307cc2188cc
Comp. Ratio 8.8:18.8:1
PISTON SPECIFICATIONS
Piston Wt. 309g344g
Piston-pin Wt. 101g103g
Comp. Height 28.5mm31.0mm
Crown Shape ConcavityConcavity
Crown Volume 15.5cc11.7cc
Recession Volume 0.0cc0.0cc
  • It's the reference value when a 0.8mm thickness gasket was used.

SUBARU EJ20

CUSTOM KIT

EJ20 Custom Kit EX 2.2L

COMPONENTS:

Forged Piston C-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, I-Beam Connecting Rod x 4, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX
Part # (GC8)1029M-F001
(GDB)1029M-F003
Bore 92.5mm
Stroke 79.0mm
Displacement 2123cc
Comp. Ratio 8.39:1
PISTON SPECIFICATIONS
Piston Wt. 389g
Piston-pin Wt. 127g
Comp. Height 32.0mm
Crown Shape Concavity
Crown Volume 11.0cc
Recession Volume N/A
  • It's the reference value when a 2.2mm thickness gasket was used.

SUBARU EJ25

CUSTOM KIT

EJ25 Custom Kit EX turbo 2.5L

This is a custom kit which fits compression ratio for turbo engine.
This kit is available to change a NA engine into the turbo, not to mention turbo engine.

COMPONENTS:

Forged Piston C-Series x 4, Piston Pin x 4, Snap Ring x 8, Piston Ring Set x 4, I-Beam Connecting Rod x 4, Billet Crank Shaft x 1

SPECIFICATIONS
Type EX
Part # 1029M-F002
Bore 100.0mm
Stroke 79.0mm
Displacement 2482cc
Comp. Ratio 8.54:1
PISTON SPECIFICATIONS
Piston Wt. 414g
Piston-pin Wt. 129g
Comp. Height 31.0mm
Crown Shape Concavity
Crown Volume 25.2cc
Recession Volume 0.2cc
  • It's the reference value when a 1.5mm thickness gasket was used.

SUZUKI K6A

CUSTOM KIT

K6A Custom Kit EX 830cc

The engine displacement is expanded 1.26 times by enlarging bore and stroke. This kit includes a special head gasket, and cylinder liners for secure strength.

COMPONENTS:

Forged Aluminum Piston x 3, Piston Pin x 3, Snap Ring x 6, Piston Ring Set x 3, I-Beam Connecting Rod x 3, Billet Crank Shaft x 1, Cylinder Liner x 3, Head Gascket x 1

You need to apply the structural modification, when use the light motor vehicle which assembled this product on the Japan public road.

SPECIFICATIONS
Type EX
Part # 1029M-S001
Bore 72.0mm
Stroke 68.0mm
Displacement 830cc
Comp. Ratio 8.75:1
PISTON SPECIFICATIONS
Piston Wt. 196g
Piston-pin Wt. 82g
Comp. Height 23.8mm
Crown Shape Concavity
Crown Volume --.-cc
Recession Volume -.-cc
  • It's the reference value when a 1.0mm thickness gasket was used.