JUN connecting rod adopted I-beam form in order to pursue lightness and strength. Because the rod is made by shaving completely, it can design in the form with no futile, and can manufacture in suitable weight which does not need balancing each rods. The big end has good shape which restrains deformation with dispersing stress for preventing the close-in phenomenon cause of welding the rod bearing. And, connecting rod bolts adopt high tension bolts manufactured by ARP because the part of the cap is made strong more. We pursue high-quality products by manufacturing in-house until it reaches manufacture from the design.
The Meaning of Strengthening Connecting Rod
Connecting rod is the parts which are easy to be made light of as unexpected in engine parts. However, it is also one of the most important parts. The high output of a turbo engine in recent years is surprised, and it is becoming impossible to already correspond with a stock connecting rod. As for the high response which is the maximum charm of NA engine, the weight of connecting rod influences response greatly. In addition, whole balance by the identity of a weight position, burden reduction of the crank metal by reduction of big end weight, as for a connecting rod, many performances are required.
The Strength of Big End
Many cases as a trouble of connecting rod, is touching unequally of the metal or scorching. As the cause, when pulling tension force by the inertia weight of a piston affects connecting rod, a big end causes transformation as shown in the right figure. It is considered as a cause that the joint of connecting rod cap can not keep required clearance.
The JUN SUPER CONNECTING ROD prevents the transformation at the time of high rotation by correcting the form of a big end and raising strength, and keeps clearance.
CLOSE IN PHENOMENON
The connecting rod is pulled in the direction of length in response to the influence of piston inertia weight, and a big end is transformed. Since clearance is not kept, scorching the metal will be caused.
PRODUCT LIST
| ENGINE | ROD SET | PIECE | ROD BOLT PIECE |
REMARKS | ||
|---|---|---|---|---|---|---|
| PART # | MSRP(yen) | PART # | MSRP(yen) | |||
| NISSAN | ||||||
| VR38DETT | 1002M-N009 | JPY195,000 | 1002M-N109 | JPY34,000 | ||
| VQ35DE | 1002M-N006 | JPY195,000 | 1002M-N106 | JPY34,000 | 1012M-001 | |
| VQ35DE(for 3.8L) | 1002M-N005 | JPY240,000 | 1002M-N105 | JPY41,000 | 1012M-001 | Exclusive use of JUN 3.8L crank shaft |
| VG30DETT | 1002M-N003 | JPY178,000 | 1002M-N103 | JPY31,000 | 1012M-001 | |
| RB26DETT | 1002M-N001 | JPY178,000 | 1002M-N101 | JPY31,000 | 1012M-001 | |
| S20 | 1002M-N012 | JPY188,000 | 1002M-N112 | JPY32,000 | 1012M-001 | |
| SR20DET | 1002M-N002 | JPY119,200 | 1002M-N102 | JPY31,000 | 1012M-001 | Connecting rod bearings for PS13/Silvia are required when this rod use on RNN14/Pulsar. |
| TOYOTA | ||||||
| 2JZ-GTE | 1002M-T005 | JPY195,000 | 1002M-T105 | JPY34,000 | 1012M-001 | |
| 1JZ-GTE | 1002M-T007 | JPY195,000 | 1002M-T107 | JPY34,000 | 1012M-001 | |
| FA20 | 1002M-F003 | JPY132,000 | 1002M-F103 | JPY35,000 | 1012M-001 | |
| 3S-GTE | 1002M-T002 | JPY132,000 | 1002M-T103 | JPY35,000 | 1012M-001 | |
| 3S-GTE(for 2.2L) | 1002M-T003 | JPY132,000 | 1002M-T101 | JPY35,000 | 1012M-001 | Exclusive use of JUN 2.2L custom kit |
| 4A-G(for latest AE92) | 1002M-T001 | JPY132,000 | 1002M-T102 | JPY35,000 | 1012M-002 | for latest AE92 (pin diameter is 20mm) |
| 1NZ-FE | 1002M-T008 | JPY104,000 | 1002M-T108 | JPY31,000 | 1012M-001 | |
| 2T-G | 1002M-T004 | JPY132,000 | 1002M-T104 | JPY35,000 | 1012M-001 | |
| HONDA | ||||||
| B16A | 1002M-H006 | JPY132,000 | 1002M-H106 | JPY35,000 | 1012M-001 | |
| B18C | 1002M-H007 | JPY132,000 | 1002M-H107 | JPY35,000 | 1012M-001 | |
| H22A | 1002M-H005 | JPY132,000 | 1002M-H105 | JPY35,000 | 1012M-001 | |
| K20A | 1002M-H009 | JPY132,000 | 1002M-H109 | JPY35,000 | 1012M-001 | |
| F20C | 1002M-H010 | JPY132,000 | 1002M-H110 | JPY35,000 | 1012M-001 | |
| MITSUBISHI | ||||||
| 4G63 | 1002M-M001 | JPY132,000 | 1002M-M102 | JPY35,000 | 1012M-002 | |
| SUBARU | ||||||
| FA20 | 1002M-F003 | JPY132,000 | 1002M-F103 | JPY35,000 | 1012M-001 | |
| EJ20 | 1002M-F002 | JPY132,000 | 1002M-F102 | JPY35,000 | 1012M-001 | |
- ‡1 Cannot use together with a stock piston
- ‡2 Necessary to change to full-floating the small end when using with stock piston.
- ‡ JUN I-beam connecting rods are full-floating type.
- ‡ Weight error of each connecting rods in a set is less than 2g.
- ‡ The displayed weights are containing a connecting rod and rod bolts. The shipping rods may be different from the above weight because the weights are reference value.
- ‡ Specify a lot-number which was carved the connecting rod or weight, when you want to buy a piece of rod. We will ship closest weight of rod.
| Name | Capacity | Part # | MSRP(yen) | Remarks |
|---|---|---|---|---|
| ARP Ultra-Torque | 15ml (0.5oz.) | 9502M-101 | JPY600 | Same lubricant as contained a rod set |
| 50ml (1.69oz.) | 9502M-102 | JPY1,800 | Tube type (with cap) |
- ‡3 This lubricant is for ARP bolts.
