CYLINDER LINER KIT
Dedicated cylinder liners are prepared for engines that can not be subjected to boring processing which was subjected to a film treatment such as plating and plasma spraying on the cylinder surface. Please use them for assembly of oversized piston, upward displacement or block regeneration.
In cylinders with insufficient strength, distortion may occur in the cylinder when raising the power. If the cylinder is distorted, the piston clearance will be out of order, so the engine will cause troubles such as abnormal discharge of blowby gas and piston scuffing. This cylinder liner kit is also useful to solve these problems.
We can also produce models not in the lineup, please feel free to contact us.
Example of installation of cylinder liners(VR38DETT)
| Engine | Application Bore | Material | Type | Part # | MSRP(yen) | Remarks |
|---|---|---|---|---|---|---|
| NISSAN | ||||||
| VR38DETT | 95.5-96.0mm | Cast Iron | DRY | 1023M-N004 | JPY180,000 | |
| 96.0mm | Aluminum (Nikasil plating) |
DRY | 1023M-N005 | JPY400,000 | Only for 96.0mm bore piston | |
| WET | 1023M-N006 | JPY400,000 | ||||
| 98.0mm | DRY | 1023M-N007 | JPY400,000 | Only for 98.0mm bore piston | ||
| WET | 1023M-N008 | JPY400,000 | ||||
| VQ37VHR | 95.5-98.0mm | Cast Iron | DRY | 1023M-N009 | JPY180,000 | |
| SR20DE(T) | 87.0mm | Cast Iron | DRY | 1023M-N002 | JPY42,000 | Only for 87.0mm bore piston |
- ‡1 Aluminum liner for VR38 is manufactured according to JUN Forged Aluminum Piston R-Series. If it is combined with other pistons, it may not be a proper piston clearance. Also, since the inner surface of the cylinder is coated with coating film, additional work can not be performed basically.
